The Best Microsoft 70-642 exam practice questions and answers

If you want to buy Microsoft 70-642 exam study guide online services, then we ITCertKing is one of the leading service provider's site. . These training products to help you pass the exam, we guarantee to refund the full purchase cost. Our website provide all the study materials and other training materials on the site and each one enjoy one year free update facilities. If these training products do not help you pass the exam, we guarantee to refund the full purchase cost.

ITCertKing is the leader in the latest Microsoft 70-642 exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Microsoft 70-642 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.

Exam Code: 70-642
Exam Name: Microsoft (TS: Windows Server 2008 Network Infrastructure, Configuring Certification )
One year free update, No help, Full refund!
Total Q&A: 350 Questions and Answers
Last Update: 2013-12-30

How far the distance between words and deeds? It depends to every person. If a person is strong-willed, it is close at hand. I think you should be such a person. Since to choose to participate in the Microsoft 70-642 certification exam, of course, it is necessary to have to go through. This is also the performance that you are strong-willed. ITCertKing Microsoft 70-642 exam training materials is the best choice to help you pass the exam. The training materials of ITCertKing website have a unique good quality on the internet. If you want to pass the Microsoft 70-642 exam, you'd better to buy ITCertKing's exam training materials quickly.

Are you still worrying about the high difficulty to pass Microsoft certification 70-642 exam? Are you still sleeplessly endeavoring to review the book in order to pass Microsoft 70-642 exam certification? Do you want to pass Microsoft 70-642 exam certification faster? Be quick to select our ITCertKing! Having it can quickly fulfill your dreams.

Microsoft 70-642 certification exam is a very difficult test. Even if the exam is very hard, many people still choose to sign up for the exam. As to the cause, 70-642 exam is a very important test. For IT staff, not having got the certificate has a bad effect on their job. Microsoft 70-642 certificate will bring you many good helps and also help you get promoted. In a word, this is a test that will bring great influence on your career. Such important exam, you also want to attend the exam.

There are a lot of sites provide the Microsoft 70-642 exam certification and other training materials for you . ITCertKing is only website which can provide you Microsoft 70-642 exam certification with high quality. In the guidance and help of ITCertKing, you can through your Microsoft 70-642 exam the first time. The questions and the answer provided by ITCertKing are IT experts use their extensive knowledge and experience manufacturing out . It can help your future in the IT industry to the next level.

You can now get Microsoft 70-642 exam certification our ITCertKing have the full version of Microsoft 70-642 exam. You do not need to look around for the latest Microsoft 70-642 training materials, because you have to find the best Microsoft 70-642 training materials. Rest assured that our questions and answers, you will be completely ready for the Microsoft 70-642 certification exam.

70-642 Free Demo Download: http://www.itcertking.com/70-642_exam.html

NO.1 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D

Microsoft   70-642   70-642 answers real questions   70-642 study guide   70-642 certification

NO.2 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C

Microsoft   70-642   70-642 pdf   70-642 braindump   70-642 study guide   70-642

NO.3 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C

Microsoft   70-642 exam dumps   70-642   70-642 certification   70-642 braindump

NO.4 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D

Microsoft braindump   70-642   70-642   70-642   70-642 practice test

NO.5 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D

Microsoft   70-642   70-642 demo   70-642

NO.6 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A

Microsoft   70-642 exam prep   70-642   70-642 test   70-642

NO.7 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A

Microsoft exam   70-642   70-642   70-642

NO.8 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A

Microsoft   70-642 test questions   70-642 questions   70-642

NO.9 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A

Microsoft certification   70-642   70-642

NO.10 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C

Microsoft certification training   70-642   70-642   70-642   70-642   70-642 exam dumps

NO.11 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A

Microsoft   70-642 exam prep   70-642 practice test

NO.12 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B

Microsoft exam prep   70-642   70-642

NO.13 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B

Microsoft exam simulations   70-642 certification training   70-642 certification   70-642 test   70-642 questions

NO.14 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D

Microsoft practice test   70-642   70-642

NO.15 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B

Microsoft   70-642   70-642   70-642 test   70-642 braindump

NO.16 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B

Microsoft pdf   70-642   70-642   70-642 answers real questions   70-642 questions   70-642

NO.17 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C

Microsoft certification training   70-642 answers real questions   70-642   70-642

NO.18 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B

Microsoft practice test   70-642   70-642 certification   70-642   70-642 braindump

NO.19 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A

Microsoft   70-642 exam simulations   70-642   70-642 braindump

NO.20 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B

Microsoft   70-642 demo   70-642 braindump   70-642   70-642 certification training

ITCertKing offer the latest 74-343 exam material and high-quality 1z0-599 pdf questions & answers. Our 000-303 VCE testing engine and 000-623 study guide can help you pass the real exam. High-quality 000-502 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/70-642_exam.html